Power

Displaying 11 - 20 of 103

AC/DC power supply meets the latest medical and IT standards

AC/DC power supply meets the latest medical and IT standards
XP Power is releasing its new GCU500 series; 500W AC/DC power supplies with features including a size of just 83.8x165.1x39.3mm. The product fits into 1U systems, these rugged products are suitable for high reliability but cost sensitive industrial applications such as robotics and renewable energy. Dual fusing, low leakage current and input/output isolation of two times MOPPs (Means Of Patient Protection) allow use in critical medical applications such as ventilators and medical carts in hospital environments.
13th December 2017

18W and 30W AC/DCs for medical applications

18W and 30W AC/DCs for medical applications
RECOMs RACM18 and RACM30 AC/DC converters were developed for medical PCB designs, which are in need of full certifications and energy efficient AC/DC modules. For that reason they are certified to the latest IEC/EN60601 medical standards, as well as the EN60335 household and the IEC/EN60950 ITE standards. The robust electronic circuitry and IP68 waterproof encapsulation withstands harsh operating conditions and makes them highly reliable.
11th December 2017

Medical power supplies have low airflow requirement

Medical power supplies have low airflow requirement
The introduction of the configurable XMS500 series of AC-DC power supplies, has been announced by TDK Corporation, which offers both Class I and Class II (double insulated) construction.  All models are compliant to curve B radiated and conducted EMI, with more than 6dB margin, yet maintain a leakage current of less than 150µA. Due to the mechanical design and high operating efficiency of the series, only 1m/s airflow is required for full load operation at 500W. 
6th December 2017


DC/DC converters receive medical safety approvals

DC/DC converters receive medical safety approvals
Artesyn Embedded Technologies has announced the AEE15W-M and AEE20W-M series, the new 15 and 20W DC/DC converters that provide OEMs with an economical solution for demanding applications in industrial and medical instrumentation requiring a certified supplementary or reinforced insulation system to comply with industrial or medical safety standards.
20th November 2017

Range of medical grade DC/DC converters now available

Range of medical grade DC/DC converters now available
Luso has announced availability of four families of medical grade 2 x MOPP DC/DC converters. These units cover power ranges of 4 to 20W. The L4MW4WR, L4M6WR4, L4M11WR4 & L4M20WR families are 4W, 6W, 11W and 20W respectively. They are all EN60601 safety approved, and have minimum of 4Kv isolation for 2MOPP applications. All are in industry standard 24DIP packages apart from the 20W family which is in a 2” x 1” package. All materials are UL94V-0, and offer 8mm creepage and clearance.
10th November 2017

The latest models of the thermoelectric assembly product line

The latest models of the thermoelectric assembly product line
  Laird has expanded its thermoelectric assembly (TEA) product offering to include a higher capacity range for critical medical equipment. Previously, the Tunnel Series TEAs offered cooling for capacities up to 39 W. The boosted Tunnel Series now offers cooling capacities exceeding 100 W to support a wider range of cooling applications.
8th November 2017

DC/DC converter features ultra-wide 4:1 input range

DC/DC converter features ultra-wide 4:1 input range
  TRACO POWER has announced the release of its THM 30WI family of medical 30W DC/DC converters with ultra-wide 4:1 input range in the industry standard 1x2” footprint. The THM 30WI series are a reliable solution not only for medical equipment but also for demanding ITE applications such as transportation, control and measurement or IGBT drivers.
6th November 2017

Medical power supplies meet curve B radiated and conducted EMI

Medical power supplies meet curve B radiated and conducted EMI
The introduction the CUS30M and CUS60M series of AC/DC power supplies has been announced by TDK Corporation, as part of the new TDK-Lambda brand. Rated at 30W and 60W, these compact and flexible products meet curve B conducted and radiated EMI in either a Class I or Class II (double insulated) construction, without the need for external filtering.
2nd November 2017

Future proofing energy solutions for medical devices

Future proofing energy solutions for medical devices
  We are all very aware of how portable consumer electronic devices have transformed our daily lives. It may be a cliché, but none of these portable devices would exist if it were not for the batteries that power them. Neil Oliver, Technical Marketing Manager at Accutronics, explains how designers can future-proof medical devices and their energy supply.
1st November 2017

15 and 20W converters for medical type BF applications

15 and 20W converters for medical type BF applications
  Providing 15 and 20W of single/dual output power in the industry standard 1x2" footprint, MINMAX has announced its MKW015M and MKW020M families of IEC/EN/ES 60601-1 type BF approved medical DC/DC converters.
27th October 2017


Power documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Medical Japan 2018
21st February 2018
Japan INTEX Osaka
Med-Tech Innovation Expo 2018
25th April 2018
United Kingdom Ricoh Arena, Coventry